European type single girder overhead crane
- Load capacity: 1 ton~ 16 tons
- Crane span: 4.5m~ 31.5m or customized
- Lifting height: 3m~ 18m or customized
- Hoist unit: wire rope hoist or chain hoist
- Working duty: FEM1Am~3m
- Power source: Based on your power supply
European type single girder overhead crane is a lifting equipment for handling materials across workshop, warehouse and stockyard. End beams of single girder overhead crane are located on concrete or steel columns. It has a shape like bridge, so we also call it bridge crane. Space under bridge can be used for transportation of cargos and materials. Obstruction of ground equipments can be avoided.
Feature & Advantage
Compared with traditional single girder overhead crane, European type single girder overhead crane has lower self height, which means clearance needed will be very small. With same lifting height, European type single girder overhead need lower height requirements for factory. Also It has lighter deadweight than traditional single girder overhead crane, which needs lower capacity column. In this two ways, cost of the factory will be much lower.
With European type single girder overhead crane, customer can save overall investment of the plant, reduce maintenance costs, and achieve better return on investment.
Technical features of European type single girder overhead crane
▶Crane end carriage adopts torsion box structure
▶Epoxy-rich zinc paint, two bottoms paint and two coats paint, long life, beautiful appearance, good gloss
▶Connection between the main beam and the end beam meets mechanical tolerances, minimize wear
▶The hoisting mechanism is compact, which makes the hook stroke more reasonable and has a wider working range.
▶Safety slide line bus bar power supply, configuration phase loss protection
▶Power the trolley with a highly flexible flat cable with ground protection
▶The pendent controller can be connected to the trolley or can be moved freely on the main beam.
▶Crane and trolley use three-in-one drive motor, frequency VVVF conversion stepless speed regulation, and the brake is stable.
▶All electrical connections use heavy-duty aviation plugs and sockets, good sealed and securely plugged
Drive motor: 3-in-1 motor (Motor, reducer and brake together as one)with IP55 protection grade
Lifting motor: 3-in-1 motor (Motor, reducer and brake together as one)with IP55 protection grade
Electrical components:Schneider electrics & Inverter
All movements can be switched off by actuating the emergency-off switch at the control station via a main contactor
Crane hook: FEM or DIN standard
Crane wheel: Forged wheels with high strength 42CrMo. Wheel processed by tempering, its hardness after heat treatment reaches HB300-HB380.
Preventive inspection service is an effective and low-cost service provided by CLESCRANE, which aims to eliminate the heavy losses caused by production stop due to equipment downtime.
We launched preventive inspection service to solve the problem that the surrounding area of your project cannot timely provide zero-distance service to your site because we do not have cooperation service provider or agent.
Our preventive inspection service is usually carried out by 1 or 2 experienced professional engineers. About half a year after the equipment you purchased was put into use, we went to the site to carry out equipment inspection and maintenance.The service time is also after your factory is off work,so it will not affect your production.
We usually advise you to purchase some consumable parts when purchasing equipment. In fact, high quality products also need regular inspection and maintenance.
Our preventive inspections are usually recommended yearly, so we can book tickets and prepare early. The length of time is determined by the complexity of the equipment, but usually only takes 2-3 days without affecting your production.
We believe that preventive inspections will provide perfect protection for your products.