jib-crane-BZ

BZ type pillar jib crane

Email: [email protected]
Mobile & Skype & WhatsApp: + 86 182 3712 0067

  • Load capacity: 1ton ~16 tons
  • Lifting height: 2m to 12m or customized
  • Hoist unit: wire rope hoist or chain hoist
  • Working duty: A3
  • Power source: Based on your power supply

Overview

BZ Type Pillar Jib Crane is a kind of crane that fixed on the ground. Its operation area is circular due to its has a rotatable cantilever. Combined with hoist unit like electric hoist, chain hoist, chain block, it can realize transportation of cargos in its coverage.

Application

BZ Type Pillar Jib Crane is widely used in production lines, assembly lines and work station of machine tools, mines and workshops, warehouses, docks, etc.

Feature & Advantage

Small space occupied, easy installation, convenient for workers to use, flexible rotation , high efficiency.

Installation

1 . Column installation:

Lift the column vertically. Set all bolts in foundation right through bolt holes on bottom flange of the column. Then adjust column verticality and tighten all nuts.

2. Arm/jib/cantileverinstallation

Before installation, lifting hoist should be installed on the arm/jib/cantilever and fixed.

Aligning shaft of column to turntable hole at end of jib/arm, then assemble arm and column together slowly. After parts are in place, tighten the fixing bolts. Then install the power supply ring. Test beam rotation with a rope and rotating should be flexible without jamming and abnormal phenomenon.

3.Drive unitinstallation:

Make cycloid reducer match with ring gear on column. Make sure that drive gear meshes with large ring gear, then fixed the reducer to flange by bolts.

Email: [email protected]
Mobile & Skype & WhatsApp: + 86 182 3712 0067

For inquiry, please send email: [email protected]

Related products